简述

• MegaCLI是LSI提供的用户空间管理RAID卡（LSI芯片）工具，适用于Dell/IBM/HUAWEI大多数服务器型号。
• Zabbix提供low_level_discovery的机制去实现自动发现监控目标，自动添加监项的功能。Zabbix默认就基于low_level_discovery提供了文件系统挂载点和网卡的自动发现和监控。
  
  

2zabbix服务搭建

非本文重点，略过

3MegaCli工具安装

yum -y install MegaCli

4功能实现

• 硬盘自动发现并加入监控（新接入一块盘会自动接入）
• 监控硬盘的物理坏道
• 监控硬盘的逻辑坏道
• 监控硬盘的预报错（DELL服务器确认硬盘是否故障的最重要指标）
• 监控硬盘的状态
• 监控阵列等级状态，一但出现降级则告警
  
  

5阀值设置

• Medaia Error Count on Every Disk <=30
• Other Error Count on Every Disk <=1000
• Predictive Failure Count On Every Disk <=2
• Firmware State on Every Disk !=Unconfigured(bad),Failed
• Raid Level State != Degraded
  
  

6硬盘自动发现

zabbix提供的自发现接口需要使用json格式

MegaCli64 -PDlist -aAll -NoLog|grep Slot|awk 'BEGIN{printf "{\"data\":[\n\n"} {printf ",\n{ \"{#SLOT_NUM}\":\"%s\"}", $NF, $1;} END{ printf "\n\t]\n}\n";}' | sed '/^,$/d'

执行代码后格式如下

#MegaCli64 -PDlist -aAll -NoLog|grep Slot|awk 'BEGIN{printf "{\"data\":[\n\n"} {printf ",\n{ \"{#SLOT_NUM}\":\"%s\"}", $NF, $1;} END{ printf "\n\t]\n}\n";}' | sed '/^,$/d'

{"data":[

{ "{#SLOT_NUM}":"0"},

{ "{#SLOT_NUM}":"1"},

{ "{#SLOT_NUM}":"2"},

{ "{#SLOT_NUM}":"3"},

{ "{#SLOT_NUM}":"4"},

{ "{#SLOT_NUM}":"5"},

{ "{#SLOT_NUM}":"6"},

{ "{#SLOT_NUM}":"7"},

{ "{#SLOT_NUM}":"8"},

{ "{#SLOT_NUM}":"9"},

{ "{#SLOT_NUM}":"10"},

{ "{#SLOT_NUM}":"11"}

}

7硬盘数据收集脚本

cat diskcheck_megacli.sh

#!/bin/bash

#zabbix监控硬盘信息脚本

#By xiangjunyu 20151101

. ~/.bash_profile > /dev/null

#获取磁盘信息

/opt/MegaRAID/MegaCli/MegaCli64 -Pdlist -a0|grep -Ei '(Slot Number|Media Error Count|Other Error Count|Predictive Failure Count|Raw Size|Firmware state)'|sed -e "s:\[0x.*Sectors\]::g" >/tmp/pdinfo.txt

#将每块磁盘信息拆分，进行逐盘分析

split -l 6 -d /tmp/pdinfo.txt /tmp/pdinfo

#获取磁盘数量（实际数量=PDNUM+1）

PDNUM=`/opt/MegaRAID/MegaCli/MegaCli64 -PDGetNum -aAll|grep Physical|awk '{ print $8 }'`

#磁盘分块后文件名规范统一化

for((i=0;i<${PDNUM};i++))

do

mv /tmp/pdinfo0${i} /tmp/pdinfo${i} >/dev/null 2>&1

#ls /tmp/pdinfo${i}

done

SLOT_NUM=$2

DATAFORMATE()

{

while read LINE

    do

        if [[ ${LINE} == Slot* ]];

            then

            SLOTNUMNAME=`echo ${LINE}|awk -F: '{ print $1 }'`

            SLOTNUM=`echo ${LINE}|awk -F: '{ print $2 }'`

        elif [[ ${LINE} == Media* ]];

            then

            MECNAME=`echo ${LINE}|awk -F: '{ print $1 }'`

            MEC=`echo ${LINE}|awk -F: '{ print $2 }'`

        elif  [[ ${LINE} == Other* ]];

            then

            OECNAME=`echo ${LINE}|awk -F: '{ print $1 }'`

            OEC=`echo ${LINE}|awk -F: '{ print $2 }'`

        elif  [[ ${LINE} == Predictive* ]];

            then

            PFCNAME=`echo ${LINE}|awk -F: '{ print $1 }'`

            PFC=`echo ${LINE}|awk -F: '{ print $2 }'`

        elif [[ ${LINE} == Raw* ]];

            then

            RAWNAME=`echo ${LINE}|awk -F: '{ print $1 }'`

            SIZE=`echo ${LINE}|awk -F: '{ print $2 }'`

        elif [[ ${LINE} == Firmware* ]];

            then

            FIRMWARENAME=`echo ${LINE}|awk -F: '{ print $1 }'`

            FIRMWARESTATUS=`echo ${LINE}|awk -F: '{ print $2 }'`

        fi

    done </tmp/pdinfo${SLOT_NUM}

}

#检测阵列等级状态

CHECKRAIDLEVEL()

{

/opt/MegaRAID/MegaCli/MegaCli64  -LDInfo -Lall -aALL|grep Degraded

if [ $? = 0 ]

then

echo -1

else

echo 0

fi

}

OPTION=$1

case $OPTION in

    mec) DATAFORMATE

         echo ${MEC}

         ;;

    oec) DATAFORMATE

         echo ${OEC}

         ;;

    pfc) DATAFORMATE

         echo ${PFC}

         ;;

    firm)

         DATAFORMATE

         if [[ "$FIRMWARESTATUS{}" = "Unconfigured(bad)" ]]

         then

             echo -1

         elif [[ "$FIRMWARESTATUS{}" = "Failed" ]]

         then

             echo -1

         else

            echo 0

        fi

         ;;

    rdlevel)

         CHECKRAIDLEVEL

         ;;

    *) echo "Please select option: mec $slot_num ;oec $slot_num;pfc $slot_num;firm $slot_num;rdlevel"

esac

rm -rf /tmp/pdinfo*

老叶备注：该脚本可以在我的github上找到，地址 https://github.com/yejr/mysqldba ... iskcheck_megacli.sh

8zabbix_agent配置

• 需要配置UnsafeUserParameters=1，本文此处设置略过
  
  

Include=/etc/zabbix/zabbix_agentd.conf.d/

UnsafeUserParameters=1

• 将zabbix用户添加到sudoers中,本文此处设置略过
  
  

echo 'zabbix ALL=(ALL) NOPASSWD: ALL' > /etc/sudoers.d/zabbix

• /etc/zabbix-2.4.1/conf/zabbix_agentd.d/disk.conf
  
  

#硬盘自动发现

UserParameter=raid.pd.discovery,MegaCli64 -PDlist -aAll -NoLog|grep Slot|awk 'BEGIN{printf "{\"data\":[\n\n"} {printf ",\n{ \"{#SLOT_NUM}\":\"%s\"}", $NF, $1;} END{ printf "\n\t]\n}\n";}' | sed '/^,$/d'

#收集Media Error Count

UserParameter=raid.phy.mec

,/opt/zabbix-2.4.1/externalscripts/diskcheck_megacli.sh mec $1

#收集Other Error Count

UserParameter=raid.phy.oec

,/opt/zabbix-2.4.1/externalscripts/diskcheck_megacli.sh oec $1

#收集Predictive Failure Count

UserParameter=raid.phy.pfc

,/opt/zabbix-2.4.1/externalscripts/diskcheck_megacli.sh pfc $1

#检测硬盘状态，有故障则回复-1

UserParameter=raid.phy.firms

,/opt/zabbix-2.4.1/externalscripts/diskcheck_megacli.sh firm $1

#检测阵列等级,有降级则回复-1

UserParameter=raid.level.state,/opt/zabbix-2.4.1/externalscripts/diskcheck_megacli.sh rdlevel

9Zabbix Server 配置9.1 新建模板

新建一个zabbix模板Raid.Phy.Megacli

Template name:Raid.Phy.Megacli

9.2 在模板中新建一个Discovery rule

Name：Physical disk discovery

Type：Zabbix agent(active)

Key：raid.pd.discovery

Update interval (in sec):3600

Keep lost resources period (in days):30

Description:Find physical disk

Enabled： ✔

9.3 在Discovery rule中新建Item

按照自己需要建立Item，我这里建四个

• Media Error Count On Slot {#SLOT_NUM}
• Other Error Count On Slot {#SLOT_NUM}
• Predictive Error Count On Slot {#SLOT_NUM}
• Firmware State On Slot {#SLOT_NUM}
  
  

这里列出一个Item详细参数

Name:Media Error Count On Slot $1

Type：Zabbix agent(active)

Key:raid.phy.mec[{#SLOT_NUM}]    #这里的key注意和disk.conf里的匹配

Applications:MegaRaid  #自己新建一个Application

Enabled： ✔

其余的默认即可

9.4 在Discovery rule中新建Trigger

Name:{HOST.NAME}Error Count On Slot {#SLOT_NUM}

Expression:{Raid.Phy.Megacli:raid.phy.mec[{#SLOT_NUM}].last(#1,0)}>30 or {Raid.Phy.Megacli:raid.phy.oec[{#SLOT_NUM}].last(#1,0)}>1000 or {Raid.Phy.Megacli:raid.phy.pfc[{#SLOT_NUM}].last(#1,0)}>2

Description:Media Error Count >30  Other Error Count >1000 Predictive Failure Count >2

Severity:Average  #根据自己想要的告警等级设定

Enabled： ✔

其余的默认即可

Name:{HOST.NAME}Firmware State On Slot {#SLOT_NUM}

Expression:{Raid.Phy.Megacli:raid.phy.firms[{#SLOT_NUM}].last(#1,0)}=-1

Severity:Average  #根据自己想要的告警等级设定

Enabled： ✔

其余的默认即可

9.5 监控raid等级状态Item

在Raid.Phy.Megacli模板中，新建一个Item

Name:Raid State

Type：Zabbix agent(active)

Key:raid.level.state    #这里的key注意和disk.conf里的匹配

Applications:MegaRaid  #自己新建的Application

Enabled： ✔

其余的默认即可

9.6 监控Raid等级Triggers

在Raid.Phy.Megacli模板中，新建一个Traggers

Name:{HOST.NAME}Raid State

Expression:{Raid.Phy.Megacli:raid.level.state.last(#1,0)}=-1

Severity:Average  #根据自己想要的告警等级设定

Enabled： ✔

其余的默认即可

原创：余祥军

简述

• MegaCLI是LSI提供的用户空间管理RAID卡（LSI芯片）工具，适用于Dell/IBM/HUAWEI大多数服务器型号。
• Zabbix提供low_level_discovery的机制去实现自动发现监控目标，自动添加监项的功能。Zabbix默认就基于low_level_discovery提供了文件系统挂载点和网卡的自动发现和监控。
  
  

2zabbix服务搭建

非本文重点，略过

3MegaCli工具安装

yum -y install MegaCli

4功能实现

• 硬盘自动发现并加入监控（新接入一块盘会自动接入）
• 监控硬盘的物理坏道
• 监控硬盘的逻辑坏道
• 监控硬盘的预报错（DELL服务器确认硬盘是否故障的最重要指标）
• 监控硬盘的状态
• 监控阵列等级状态，一但出现降级则告警
  
  

5阀值设置

• Medaia Error Count on Every Disk <=30
• Other Error Count on Every Disk <=1000
• Predictive Failure Count On Every Disk <=2
• Firmware State on Every Disk !=Unconfigured(bad),Failed
• Raid Level State != Degraded
  
  

6硬盘自动发现

zabbix提供的自发现接口需要使用json格式

MegaCli64 -PDlist -aAll -NoLog|grep Slot|awk 'BEGIN{printf "{\"data\":[\n\n"} {printf ",\n{ \"{#SLOT_NUM}\":\"%s\"}", $NF, $1;} END{ printf "\n\t]\n}\n";}' | sed '/^,$/d'

执行代码后格式如下

#MegaCli64 -PDlist -aAll -NoLog|grep Slot|awk 'BEGIN{printf "{\"data\":[\n\n"} {printf ",\n{ \"{#SLOT_NUM}\":\"%s\"}", $NF, $1;} END{ printf "\n\t]\n}\n";}' | sed '/^,$/d'

{"data":[

{ "{#SLOT_NUM}":"0"},

{ "{#SLOT_NUM}":"1"},

{ "{#SLOT_NUM}":"2"},

{ "{#SLOT_NUM}":"3"},

{ "{#SLOT_NUM}":"4"},

{ "{#SLOT_NUM}":"5"},

{ "{#SLOT_NUM}":"6"},

{ "{#SLOT_NUM}":"7"},

{ "{#SLOT_NUM}":"8"},

{ "{#SLOT_NUM}":"9"},

{ "{#SLOT_NUM}":"10"},

{ "{#SLOT_NUM}":"11"}

}

7硬盘数据收集脚本

cat diskcheck_megacli.sh

#!/bin/bash

#zabbix监控硬盘信息脚本

#By xiangjunyu 20151101

. ~/.bash_profile > /dev/null

#获取磁盘信息

/opt/MegaRAID/MegaCli/MegaCli64 -Pdlist -a0|grep -Ei '(Slot Number|Media Error Count|Other Error Count|Predictive Failure Count|Raw Size|Firmware state)'|sed -e "s:\[0x.*Sectors\]::g" >/tmp/pdinfo.txt

#将每块磁盘信息拆分，进行逐盘分析

split -l 6 -d /tmp/pdinfo.txt /tmp/pdinfo

#获取磁盘数量（实际数量=PDNUM+1）

PDNUM=`/opt/MegaRAID/MegaCli/MegaCli64 -PDGetNum -aAll|grep Physical|awk '{ print $8 }'`

#磁盘分块后文件名规范统一化

for((i=0;i<${PDNUM};i++))

do

mv /tmp/pdinfo0${i} /tmp/pdinfo${i} >/dev/null 2>&1

#ls /tmp/pdinfo${i}

done

SLOT_NUM=$2

DATAFORMATE()

{

while read LINE

    do

        if [[ ${LINE} == Slot* ]];

            then

            SLOTNUMNAME=`echo ${LINE}|awk -F: '{ print $1 }'`

            SLOTNUM=`echo ${LINE}|awk -F: '{ print $2 }'`

        elif [[ ${LINE} == Media* ]];

            then

            MECNAME=`echo ${LINE}|awk -F: '{ print $1 }'`

            MEC=`echo ${LINE}|awk -F: '{ print $2 }'`

        elif  [[ ${LINE} == Other* ]];

            then

            OECNAME=`echo ${LINE}|awk -F: '{ print $1 }'`

            OEC=`echo ${LINE}|awk -F: '{ print $2 }'`

        elif  [[ ${LINE} == Predictive* ]];

            then

            PFCNAME=`echo ${LINE}|awk -F: '{ print $1 }'`

            PFC=`echo ${LINE}|awk -F: '{ print $2 }'`

        elif [[ ${LINE} == Raw* ]];

            then

            RAWNAME=`echo ${LINE}|awk -F: '{ print $1 }'`

            SIZE=`echo ${LINE}|awk -F: '{ print $2 }'`

        elif [[ ${LINE} == Firmware* ]];

            then

            FIRMWARENAME=`echo ${LINE}|awk -F: '{ print $1 }'`

            FIRMWARESTATUS=`echo ${LINE}|awk -F: '{ print $2 }'`

        fi

    done </tmp/pdinfo${SLOT_NUM}

}

#检测阵列等级状态

CHECKRAIDLEVEL()

{

/opt/MegaRAID/MegaCli/MegaCli64  -LDInfo -Lall -aALL|grep Degraded

if [ $? = 0 ]

then

echo -1

else

echo 0

fi

}

OPTION=$1

case $OPTION in

    mec) DATAFORMATE

         echo ${MEC}

         ;;

    oec) DATAFORMATE

         echo ${OEC}

         ;;

    pfc) DATAFORMATE

         echo ${PFC}

         ;;

    firm)

         DATAFORMATE

         if [[ "$FIRMWARESTATUS{}" = "Unconfigured(bad)" ]]

         then

             echo -1

         elif [[ "$FIRMWARESTATUS{}" = "Failed" ]]

         then

             echo -1

         else

            echo 0

        fi

         ;;

    rdlevel)

         CHECKRAIDLEVEL

         ;;

    *) echo "Please select option: mec $slot_num ;oec $slot_num;pfc $slot_num;firm $slot_num;rdlevel"

esac

rm -rf /tmp/pdinfo*

老叶备注：该脚本可以在我的github上找到，地址 https://github.com/yejr/mysqldba ... iskcheck_megacli.sh

8zabbix_agent配置

• 需要配置UnsafeUserParameters=1，本文此处设置略过
  
  

Include=/etc/zabbix/zabbix_agentd.conf.d/

UnsafeUserParameters=1

• 将zabbix用户添加到sudoers中,本文此处设置略过
  
  

echo 'zabbix ALL=(ALL) NOPASSWD: ALL' > /etc/sudoers.d/zabbix

• /etc/zabbix-2.4.1/conf/zabbix_agentd.d/disk.conf
  
  

#硬盘自动发现

UserParameter=raid.pd.discovery,MegaCli64 -PDlist -aAll -NoLog|grep Slot|awk 'BEGIN{printf "{\"data\":[\n\n"} {printf ",\n{ \"{#SLOT_NUM}\":\"%s\"}", $NF, $1;} END{ printf "\n\t]\n}\n";}' | sed '/^,$/d'

#收集Media Error Count

UserParameter=raid.phy.mec

,/opt/zabbix-2.4.1/externalscripts/diskcheck_megacli.sh mec $1

#收集Other Error Count

UserParameter=raid.phy.oec

,/opt/zabbix-2.4.1/externalscripts/diskcheck_megacli.sh oec $1

#收集Predictive Failure Count

UserParameter=raid.phy.pfc

,/opt/zabbix-2.4.1/externalscripts/diskcheck_megacli.sh pfc $1

#检测硬盘状态，有故障则回复-1

UserParameter=raid.phy.firms

,/opt/zabbix-2.4.1/externalscripts/diskcheck_megacli.sh firm $1

#检测阵列等级,有降级则回复-1

UserParameter=raid.level.state,/opt/zabbix-2.4.1/externalscripts/diskcheck_megacli.sh rdlevel

9Zabbix Server 配置9.1 新建模板

新建一个zabbix模板Raid.Phy.Megacli

Template name:Raid.Phy.Megacli

9.2 在模板中新建一个Discovery rule

Name：Physical disk discovery

Type：Zabbix agent(active)

Key：raid.pd.discovery

Update interval (in sec):3600

Keep lost resources period (in days):30

Description:Find physical disk

Enabled： ✔

9.3 在Discovery rule中新建Item

按照自己需要建立Item，我这里建四个

• Media Error Count On Slot {#SLOT_NUM}
• Other Error Count On Slot {#SLOT_NUM}
• Predictive Error Count On Slot {#SLOT_NUM}
• Firmware State On Slot {#SLOT_NUM}
  
  

这里列出一个Item详细参数

Name:Media Error Count On Slot $1

Type：Zabbix agent(active)

Key:raid.phy.mec[{#SLOT_NUM}]    #这里的key注意和disk.conf里的匹配

Applications:MegaRaid  #自己新建一个Application

Enabled： ✔

其余的默认即可

9.4 在Discovery rule中新建Trigger

Name:{HOST.NAME}Error Count On Slot {#SLOT_NUM}

Expression:{Raid.Phy.Megacli:raid.phy.mec[{#SLOT_NUM}].last(#1,0)}>30 or {Raid.Phy.Megacli:raid.phy.oec[{#SLOT_NUM}].last(#1,0)}>1000 or {Raid.Phy.Megacli:raid.phy.pfc[{#SLOT_NUM}].last(#1,0)}>2

Description:Media Error Count >30  Other Error Count >1000 Predictive Failure Count >2

Severity:Average  #根据自己想要的告警等级设定

Enabled： ✔

其余的默认即可

Name:{HOST.NAME}Firmware State On Slot {#SLOT_NUM}

Expression:{Raid.Phy.Megacli:raid.phy.firms[{#SLOT_NUM}].last(#1,0)}=-1

Severity:Average  #根据自己想要的告警等级设定

Enabled： ✔

其余的默认即可

9.5 监控raid等级状态Item

在Raid.Phy.Megacli模板中，新建一个Item

Name:Raid State

Type：Zabbix agent(active)

Key:raid.level.state    #这里的key注意和disk.conf里的匹配

Applications:MegaRaid  #自己新建的Application

Enabled： ✔

其余的默认即可

9.6 监控Raid等级Triggers

在Raid.Phy.Megacli模板中，新建一个Traggers

Name:{HOST.NAME}Raid State

Expression:{Raid.Phy.Megacli:raid.level.state.last(#1,0)}=-1

Severity:Average  #根据自己想要的告警等级设定

Enabled： ✔

其余的默认即可

原创：余祥军